I've just bought a device that allows you to connect external drives to a USB port, but I can't access the driver as it comes in a Classic installer, which obviously won't run in OS X. If anyone has the following files. /System Folder/Extensions/Gene USB ATA Driver /System Folder/Extensions/Gene USB ATA Shim.would you be able to email them to me please? Or alternatively if I sent you the installer could you extract it in the Classic environment and send me the contents? All this is assuming these extensions will work in OS X. Well I've tried it on two Windows PCs now and still no luck. Plug and Play recognises the drive and installs the necessary drivers, but it fails to show up under My Computer.

• Bytecc Usb Portable Diskette Drive

It's listed under Device Manager by its serial number, yet remains inaccessible. I've read elsewhere that installing the extension GeneIOUSBIDE230 might help, but it doesn't appear to have made any difference.

BYTECC USB Windows drivers will help to adjust your device and correct errors. Free drivers for BYTECC USB are taken from manufacturers' official websites. Install DriverHub utility and solve all driver problems. Download >> Download Usb 2.0 drive mate manualRead Online >> Read Online Usb 2.0 drive mate manual usb 2.0 drive mate windows 10 usb 2.0 drive mate not recognized best usb universal drive adapter usb 2.0 to sata/ide cable driver download windows 10 bytecc usb 2.0 drive mate doesn't appear.

I'm assuming it's OK to just place the folder in System/Library/Extensions seeing as it doesn't come with any instructions. Back on the Mac side I think I may have made some progress. I disconnected all my USB peripherals except for the keyboard and mouse and then reconnected the bridge hooked up to the laptop drive. This time it appeared in System Profiler, but still wouldn't mount in Finder or show up in Disk Utility. System Profiler identifies the BSD name of the drive as 'disk1' so I thought I might be able to try mounting the drive manually via Terminal. I created a mount point using the command 'mkdir /Volumes/rescue' and then tried mounting the drive like so: 'mount -t hfs /dev/disk1 /Volumes/rescue' All I get is the error 'mounthfs: No such file or directory'. Trying to mount specific partitions e.g.

Disk1s2 doesn't work either. Am I at least on the right track? I've now done that and after a lot of USB plug hopping got System Profiler and Disk Utility to recognise the drive (and partitions in the case of DD).

It still won't mount in Finder and DiskWarrior reports: 'Directory cannot be rebuilt due to disk hardware failure (-36 2257)'. I've instructed Disk Utility to try to repair the disk and it's making a real meal of it (the stripy barber's shop progress indicator pole is revolving indefinitely without actually reporting success of any kind). This isn't looking too hopeful but I'll keep plugging away to try and repair the drive.

Sorry to hear that, though there's not really a lot I can add that's not already been said in this thread. As advised I got myself a powered external caddy and then went through the trial and error process of mounting and unmounting it, and connecting it via every single USB port - those on the back of my Mac Mini as well as the ones on my USB hub. Before doing so I unplugged every non-essential USB device to ensure the drive would not be competing for power or other resources.

Then I loaded up Data Rescue II and followed the standard instructions for scanning the drive for salvageable files. It was a very frustrating experience, but persistence paid off in the end. About a month too late to be of any help I received a reply from Seagate's tech support dept which may be of assistance to you. Thank you for sending your E-mail inquiry. With regards to your query, I understand that the subject drive is inaccessible on another computer.

Note: Seagate do not support connecting Internal drives via USB External Enclosure. However, if your Seagate PATA drive is not detected when connected via USB using External Enclosure, put the jumper on 'Cable Select' and check if it is accessible. Else remove the jumper to make it a slave and try connecting the drive directly to the computer, if it is accessible then the drive is fine. Please make sure that the drive is formatted according to the required file file system on that computer. Title: PC and Mac File Systems Overview URL: If you want to use the drive on mac, please follow the steps provided in the following URL to format your drive on MAC: Title: Formatting an Internal or External hard drive using Mac OS URL: Still you want to work with the drive being connected via USB and if it is not detected please contact the External Enclosure vendor. If this does not solve the issue please contact our Online Technical Support for further assistance.

Due to the nature of your particular problem and the need for interaction, contacting Seagate directly via telephone will provide you with a quicker and more appropriate resolution to your issue. Seagate technical support agents are available to assist you between 6:30AM and 9:30PM CST, Monday - Friday at 1-800-SEAGATE (1-800-732-4283).

If you have any additional questions, please let me know. Thank you, Abraham Smith Seagate Technical Support. Click to expand.A little OT, but if I connect a hard drive (no enclosure) directly to the Bytecc BT-300 through the SATA Drive port and I don't see anything show up on the screen.Or when I go into Disk Utility, I don't see my hard drive, does that mean that my hard drive is dead?

I installed a WD3200BEVT in my MacBook Pro and it was working fine but it was recently sent to Applecare where heavy repairs occurred and my computer was returned with this hard drive taken out and a new one (only 150gb) put in. I am not quite sure why by looking at their notes, but my assumption was that it failed in their testing?). I took my BYTECC BT-300 directly to the WD3200BEVT and I can hear the hard drive making noise, but nothing is happening on screen.

Bytecc USB 2.0 Drive Mate Drivemate USB 2.0 to IDE/SATA Adapter Kit The adapter supports all existing IDE/ATAPI/SATA devices such as Iomega Zip, CD-ROM, CD-RW, DVD-ROM and IDE hard drives. The USB 2.0 to IDE/SATA Drive Adapter implements a bridge between one USB port and one ATA or ATAPI/SATA based mass storage device port. The USB 2.0 to IDE/SATA Drive Adapter turns any IDE/SATA drive into a convenient external drive.

Easily transfer files from computer or notebook, back up files, or store large file archives on hard drives. The Hi-Speed USB interface provides for easy installation with its Plug and Play design. USB 2.0 to IDE/SATA Cable.

Support SATA HDD up to 1500GB(1.5TB), IDE HDD up to 750GB. Connect any device with an IDE/SATA Interface to a PC with USB interface. Transfer rate Approx. 480 MBps. Complies with USB 2.0 standards.

Bytecc Usb Portable Diskette Drive

Backwards compatible to USB 1.1 standards. Complies with ATA/ATAPI-66 Spe. V1.0.

Easy to Install. Supports IDE/SATA and enhanced IDE hard drives.

Supports ATA/ATAPI/SATA CD-ROM/R/RW DVD-ROM and more. External power adapter for IDE/ATAPI/SATA devices.

Linux, Mac compatible. Tips to install BT-300 Package Contains:.

USB 2.0 to IDE/SATA adapter cable. Power adapter and cord. Driver CD for 98SE Bytecc USB 2.0 Drive Mate, Buy Bytecc USB 2 Drive Mate Visit the for more information. Support H.D.D up to 1500 GB (1.5 TB).